Products
Contact Us
Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Skype:
yuxi.zhengzhou
Follow Us:
What do we need to pay attention to when the metal shredder is working?
1. The material should be evenly added into the shredder cavity. It should not be fed on one side or filled with feed to prevent overload.
2. In use, ensure that the temperature of the bearing does not exceed 65 degrees Celsius. After exceeding the temperature, immediately stop the machine to find out the cause.
3. Before stopping, wait until the material in the tearing chamber is completely drained before turning off the motor. During the shredding process, if the material is found to be blocked, the power should be turned off immediately to clear the material before starting.
4. After one end of the tooth plate is worn, it can be turned around to use.
Remind users that we must follow the instructions, can extend the life of the machine, and increase the output of the machine, which is a multi-pronged approach.
1. The material should be evenly added into the shredder cavity. It should not be fed on one side or filled with feed to prevent overload.
2. In use, ensure that the temperature of the bearing does not exceed 65 degrees Celsius. After exceeding the temperature, immediately stop the machine to find out the cause.
3. Before stopping, wait until the material in the tearing chamber is completely drained before turning off the motor. During the shredding process, if the material is found to be blocked, the power should be turned off immediately to clear the material before starting.
4. After one end of the tooth plate is worn, it can be turned around to use.
Remind users that we must follow the instructions, can extend the life of the machine, and increase the output of the machine, which is a multi-pronged approach.
Please click on "WhatsApp" contact us at any time.