Products
Contact Us
Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
Skype:
yuxi.zhengzhou
Follow Us:
For wood shredders, wood is easier to shred.
In the wood industry, the raw materials of wood are different, so the machine will be shaken.
Therefore, when switching to a different screen, the load on the shredder is greatly affected.
When using a sieve with a mesh diameter of 1.2 mm, the motor capacity should be 40 kW; when using a sieve with a mesh diameter of 2 mm, the motor capacity should be 30 kW; when replacing the sieve with a mesh diameter of 3 mm, the motor The capacity should be 22 kW.
For the shredder is not overloaded, there is a set of ways to check:
1. Directly use the contact level gauge to indicate the level of material in the chamber, and you can know whether it is loaded.
2. Weigh the amount of the shredder feed belt conveyor with a belt weigher.
3. It is destroyed by accounting and the cyclic load of the screening closed circuit system is obtained.Check the current value in the motor circuit of the wood shredder. The current when the shredder is working is usually controlled at about 85% of the rated current.
The selection of the shredder is based on the raw materials that the customer needs to shred. If you have a lot of scrap wood, you can come to Yuxi Machinery to pick the right shredder equipment to create better benefits for you.
In the wood industry, the raw materials of wood are different, so the machine will be shaken.
Therefore, when switching to a different screen, the load on the shredder is greatly affected.
When using a sieve with a mesh diameter of 1.2 mm, the motor capacity should be 40 kW; when using a sieve with a mesh diameter of 2 mm, the motor capacity should be 30 kW; when replacing the sieve with a mesh diameter of 3 mm, the motor The capacity should be 22 kW.
For the shredder is not overloaded, there is a set of ways to check:
1. Directly use the contact level gauge to indicate the level of material in the chamber, and you can know whether it is loaded.
2. Weigh the amount of the shredder feed belt conveyor with a belt weigher.
3. It is destroyed by accounting and the cyclic load of the screening closed circuit system is obtained.Check the current value in the motor circuit of the wood shredder. The current when the shredder is working is usually controlled at about 85% of the rated current.
The selection of the shredder is based on the raw materials that the customer needs to shred. If you have a lot of scrap wood, you can come to Yuxi Machinery to pick the right shredder equipment to create better benefits for you.
Please click on "WhatsApp" contact us at any time.