Products

Shredder Machine

Scrap Metal Shredder Waste Tire Shredder Waste Car Shredder Scrap Aluminum Shredder Single Shaft Shredder Domestic Garbage Shredder Plastic Crusher Medical Waste Shredder

Waste Metal Recycling Line

Scrap Car Crushing Separating L Scrap Metal Crushing Plant AC Radiator Recycling Line Waste Rotor Recycling Line Scrap Car Engine Crushing Line Medical Waste Recycling Line

Optional Equipments

Central Dust Collector Magnetic Separator Machine Eddy Current Sorting Machine Scrap Metal Crusher Metal Shredder Crocodile Shear Waste Copper Cable Wire Recycli Hydraulic Metal Baler Machine

Tire Recycling Machine

Waste tire recycling machinery

Contact Us

Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)

Skype: yuxi.zhengzhou

Position : Home > News >

As we all know, the shredder plays a very important role in the recycling of used tires.
It can shred various waste materials and is quick to operate.

The metal shredder blade is the focus of maintenance in the equipment and requires care and maintenance:

1. The alloy head of the tire shredder has a sharp and sensitive cutting edge, so care must be taken to maintain the alloy head from damage during blade movement, assembly and assembly.

2. Irregular attention to the radial runout (±0.02mm) of the machine spindle and the swing (±0.01mm) ensure that the blade of the device fits into each other.

3. It is necessary to clean the spindle and the debris on the flange before the blade unit. The outer surface of the flange should be flat, clean and perpendicular to the axis.

4. The size of the flange is 1/3 of the saw blade diameter (the thin saw blade should be 1/2D flange). The sawing effect is better (especially the thin blade).

5. The blade should be idling for 30 seconds after the device, and then start the machine work after determining that everything is normal.

6. When the blade is installed, it must be tight and the loose saw blade will slip during rotary cutting. If the blade is too tight, it will be damaged or deformed to affect the cutting effect.

7. Before cutting, the operator must bring protective equipment (protective glasses, dust masks, safety caps, protective gloves) and check whether the saw guard can be broken.

8. In the following conditions, it is necessary to repair in time:
a) When the quality of the car tire shredder blade no longer meets the requirements;
b) when the energy consumption of the machine tool is clearly increased;
c) the edge of the cutting data has a distinct burst time;
d) When the wear of the alloy edge reaches 0.2mm, it is very important to repair it in time.

9. It is necessary to clean up the resin, debris and other debris accumulated on the front side of the sawtooth and the saw blade. The adhesive will increase the resistance and form high energy consumption (in extreme cases, the machine motor will burn).

10. Corrosive solvents should not be used during cleaning. When the saw blade is not used for a long time, it should be cleaned and sharpened. After the oil is used for anti-rust treatment, put it in the original carton and place it properly.

11. Use a fine, fluctuating and vibration-free sharpening machine, as well as a suitable diamond grinding wheel. Grinding the alloy head in accordance with the regular sequence of operations will extend the life of the saw blade. Do not use hand-operated sharpening equipment.

Get a Free Quote Now!

Tel：0086-0371-53762053

Tel：0086-13674998188

Whatsapp：0086 13674998188

Wechat:8613674998188

Skype：yuxi.zhengzhou

E-mail：zhengzhouyuxi@yuximachine.com