Products

Shredder Machine

Scrap Metal Shredder Waste Tire Shredder Waste Car Shredder Scrap Aluminum Shredder Single Shaft Shredder Domestic Garbage Shredder Plastic Crusher Medical Waste Shredder

Waste Metal Recycling Line

Scrap Car Crushing Separating L Scrap Metal Crushing Plant AC Radiator Recycling Line Waste Rotor Recycling Line Scrap Car Engine Crushing Line Medical Waste Recycling Line

Optional Equipments

Central Dust Collector Magnetic Separator Machine Eddy Current Sorting Machine Scrap Metal Crusher Metal Shredder Crocodile Shear Waste Copper Cable Wire Recycli Hydraulic Metal Baler Machine

Tire Recycling Machine

Waste tire recycling machinery

Contact Us

Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)

Skype: yuxi.zhengzhou

Position : Home > News >

It is usually necessary to regularly fill the bearings of the spindle bearings, motor bearings, rollers, etc. to ensure the normal operation of the machine. Generally, the operation is about 40 days. The waste shredder machine bearing needs to be repaired and replaced once, and the lubricating oil is filled once every 5 days. .

Two.waste shredder machine hammer wear problem
With the extension of the application time, the waste shredder machine will present different degrees of wear problems. At this time, we need to repair the hammer of the equipment, update the new hammer structure, and reasonably weigh the weight to ensure the normal operation of the machine. Can greatly slow down the wear rate of the machine and then increase the life of the machine.

Three.waste shredder machine running alert device overheating problem

1. The triangular drive belt of the equipment on the motor is too large, and the belt is slippery and hot, resulting in insufficient power of the whole machine.

2. The main shaft and the bearing are damaged and worn seriously, resulting in the friction of the main shaft and related components becoming larger, and the temperature continues to rise, which seriously affects the operation of the whole machine;

2. In addition to the above reasons, the high load operation of the motor, in the feeding and discharging process, can not control the amount of material well, the feed amount is too much or the discharge port is too small, resulting in high motor load, it will also lead to The abnormal heat of the motor will seriously burn the motor directly.

If these problems are found during the operation of the equipment, it is necessary to stop the operation of the equipment in time and perform maintenance and repair, otherwise the equipment will be irreversibly damaged.

Get a Free Quote Now!

Tel：0086-0371-53762053

Tel：0086-13674998188

Whatsapp：0086 13674998188

Wechat:8613674998188

Skype：yuxi.zhengzhou

E-mail：zhengzhouyuxi@yuximachine.com