Products

Shredder Machine

Scrap Metal Shredder Waste Tire Shredder Waste Car Shredder Scrap Aluminum Shredder Single Shaft Shredder Domestic Garbage Shredder Plastic Crusher Medical Waste Shredder

Waste Metal Recycling Line

Scrap Car Crushing Separating L Scrap Metal Crushing Plant AC Radiator Recycling Line Waste Rotor Recycling Line Scrap Car Engine Crushing Line Medical Waste Recycling Line

Optional Equipments

Central Dust Collector Magnetic Separator Machine Eddy Current Sorting Machine Scrap Metal Crusher Metal Shredder Crocodile Shear Waste Copper Cable Wire Recycli Hydraulic Metal Baler Machine

Tire Recycling Machine

Waste tire recycling machinery

Contact Us

Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)

Skype: yuxi.zhengzhou

Position : Home > News >

Mini aluminum can shredder has been widely used in the metal smashing industry, and the mini aluminum can shredder can be adjusted to produce qualified materials. Mini aluminum can shredder is equipped with a wedge or pad
For the sheet adjusting device, when the adjusting bolt is pulled up, the wedge will lift the movable roller away from the fixed wheel, and the movable roller will become smaller under the action of the pressing spring, and the discharge granularity becomes smaller, and the operation is small.
The above are also very simple, allowing customers to see at a glance, then through the adjustment of the metal mini aluminum can shredder equipment, the smashed materials are very good and very uniform, can be in the middle of the production process A very good production efficiency. The mini aluminum can shredder should be inspected regularly during use.
1. It is necessary to regularly check the inside of the crushing equipment, and then make an accurate judgment based on the temperature inside the crusher equipment, and this is based on the top of the crusher to the fuel controlling to avoid excessive or too little fuel addition has caused one of the main reasons for the underfire of the crusher.
2, always pay attention to the mini aluminum can shredder's damper for the control of the control, adjust the ventilation inside the crusher, if necessary, must control the air intake at the bottom of the crusher
The reduction of the after wind and then the reduction of the damper to the internal crushing of the crusher to improve the combustion quality and heat exchange efficiency of the fuel, eliminating the under-fire phenomenon in the waste metal shredder.
Yuxi mini aluminum can shredder from 400 to 1600 models are available, for the size of the discharge size, choose the mini aluminum can shredder equipment, I hope you find the right model.

Get a Free Quote Now!

Tel：0086-0371-53762053

Tel：0086-13674998188

Whatsapp：0086 13674998188

Wechat:8613674998188

Skype：yuxi.zhengzhou

E-mail：zhengzhouyuxi@yuximachine.com