Products

Shredder Machine

Scrap Metal Shredder Waste Tire Shredder Waste Car Shredder Scrap Aluminum Shredder Single Shaft Shredder Domestic Garbage Shredder Plastic Crusher Medical Waste Shredder

Waste Metal Recycling Line

Scrap Car Crushing Separating L Scrap Metal Crushing Plant AC Radiator Recycling Line Waste Rotor Recycling Line Scrap Car Engine Crushing Line Medical Waste Recycling Line

Optional Equipments

Central Dust Collector Magnetic Separator Machine Eddy Current Sorting Machine Scrap Metal Crusher Metal Shredder Crocodile Shear Waste Copper Cable Wire Recycli Hydraulic Metal Baler Machine

Tire Recycling Machine

Waste tire recycling machinery

Contact Us

Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)

Skype: yuxi.zhengzhou

Position : Home > News >

When the shredder encounters a malfunction and needs repair, it is necessary to disassemble the equipment to check the repair. For non-technical people, disassembly is easier, but reassembly is more complicated, including assembling parts according to assembly drawings. The process of assembling parts and assembling the entire machine should also include the assembly process and adjustment of the test machine after assembly. After completing the above process, there is no problem, then you can use it with confidence. shredder is rugged and not prone to problems. Paper shredders are more destructive and have a longer life, bringing more benefits to users.
The shredder machine can destroy large diameters of materials up to 3 meters, and all materials of this size can be destroyed. Simple operation and high output. The operation of the shredder is simple and fast, and the entire production line requires only three to four people. The greater the viscosity of the material, the simpler the damage inside the machine, and the increased the resistance of the machine, the smaller the crushing efficiency. If the material has too much water, the water can break. Time sticks easily to the blade of the shredder machine, increasing the resistance of the machine. If the inside of the machine is adhered to the broken end, it is easy to be blocked during the feeding process, which seriously affects the crushing ability of the machine.
During the shredder machine cleaning process, to prevent the surface of the shredded parts from being scratched, the oil hole in the bearing box must be clear, and then gauze or cotton thread should be inserted into the hole to prevent dust from entering. For example, the center of gravity of pulleys, gears, shredder machine blades, etc. must coincide with the center of rotation. Otherwise, the shredder machine is running, which may affect the use of mechanical equipment due to the movement of the center of gravity. After the shredder is complete, tools such as wrenches remain in the tear chamber. After the power is turned on, the machine is turned on for 3 to 4 seconds. The machine runs normally after there is no abnormal sound or vibration.

Get a Free Quote Now!

Tel：0086-0371-53762053

Tel：0086-13674998188

Whatsapp：0086 13674998188

Wechat:8613674998188

Skype：yuxi.zhengzhou

E-mail：zhengzhouyuxi@yuximachine.com