Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail:
zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)
The reason why the wood shredder will show uneven material may be related to the structure of the screen bottom; if the amount of material is too much, then because the space of the screen bottom is limited, it may cause the material to be discharged from the screen bottom in a timely manner. In the end, the material discharged from the equipment may appear to be lacking.
Originally, this time did not need to be overly alarmed, just need to check the wood shredder in time to see if any parts and parts were negligent. And focus on checking the orientation of the bottom of the sieve to see if there is too much material. If it is, then manually extracting the material directly can solve the problem. The size of the product material of the wood crusher is usually a sawdust-like material. The inspection method of the product material is usually based on the moisture content of the material. If the moisture content is less than 10%, from a physical point of view, the density of the material is large and it is very solid. There is a comparatively applicable method for checking the particles of the material, that is, placing the particles in a glass of water, if the material sinks, it proves that the density of the wood material is high, and the pressure is higher in the processing of the wood crusher. Enough. On the contrary, if the particles float on the water surface, it is abundantly confirmed that the density is very low and the quality is very poor. The durability of such materials is very poor, and it is very simple to grind. Most of the materials processed by the wood grinder become fine.
There is another kind of inspection method, that is, to find a container that can contain at least one liter of water, weigh the weight, then fill the container with wood pellets, and then look at the weight, minus the gross weight of the container, use the note The amount of full particles is divided by the amount of filled water.
The calculation result of the wood chip material processed by the wood shredder should be between 0.6 and 0.7 kg/L, and this value can also be regarded as the specific gravity of the particles. It is a very important parameter, which indicates whether the pressure is accurate or not when manufacturing particles. For those unqualified particles, this value will be less than 0.6. These are very simple to break and smash, and a lot of fines will occur. You can judge the quality of the goods.