Products

Shredder Machine

Scrap Metal Shredder Waste Tire Shredder Waste Car Shredder Scrap Aluminum Shredder Single Shaft Shredder Domestic Garbage Shredder Plastic Crusher Medical Waste Shredder

Waste Metal Recycling Line

Scrap Car Crushing Separating L Scrap Metal Crushing Plant AC Radiator Recycling Line Waste Rotor Recycling Line Scrap Car Engine Crushing Line Medical Waste Recycling Line

Optional Equipments

Central Dust Collector Magnetic Separator Machine Eddy Current Sorting Machine Scrap Metal Crusher Metal Shredder Crocodile Shear Waste Copper Cable Wire Recycli Hydraulic Metal Baler Machine

Tire Recycling Machine

Waste tire recycling machinery

Contact Us

Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)

Skype: yuxi.zhengzhou

Position : Home > News >

1. Check and clean in time. After working every day, the waste shredder machine should be cleaned in time. Check for loose screws and wear of parts that are prone to wear, such as claws and screens.

　　 2. Add grease in time, the cover oil cup is usually assembled on the bearing. Generally speaking, as long as the oil cup cover rotates 1/4 times every 2 hours, the grease in the oil cup will be pressed into the bearing. If it is a closed bearing, grease can be added every 300 hours. After long-term use, if the grease deteriorates, the bearings should be cleaned and replaced with new grease. When the machine is working, the temperature of the bearing should not exceed 40°C. If the temperature of the bearing continues to increase under normal operating conditions, the cause should be found and the fault eliminated.

　　 3. Do not increase the speed of the plastic shredder at will. Generally speaking, the difference between the speed and the rated speed is 8%-10%. When the shredder is working on a large power machine, it should pay attention to control the flow rate to make the flow rate uniform, so that it cannot suddenly accelerate or decelerate.

Get a Free Quote Now!

Tel：0086-0371-53762053

Tel：0086-13674998188

Whatsapp：0086 13674998188

Wechat:8613674998188

Skype：yuxi.zhengzhou

E-mail：zhengzhouyuxi@yuximachine.com