Products

Shredder Machine

Scrap Metal Shredder Waste Tire Shredder Waste Car Shredder Scrap Aluminum Shredder Single Shaft Shredder Domestic Garbage Shredder Plastic Crusher Medical Waste Shredder

Waste Metal Recycling Line

Scrap Car Crushing Separating L Scrap Metal Crushing Plant AC Radiator Recycling Line Waste Rotor Recycling Line Scrap Car Engine Crushing Line Medical Waste Recycling Line

Optional Equipments

Central Dust Collector Magnetic Separator Machine Eddy Current Sorting Machine Scrap Metal Crusher Metal Shredder Crocodile Shear Waste Copper Cable Wire Recycli Hydraulic Metal Baler Machine

Tire Recycling Machine

Waste tire recycling machinery

Contact Us

Service Tel:+86-371-53762053
Tel/whatsapp/wechat:+86-13674998188 (24 hours online)
E-mail: zhengzhouyuxi@yuximachine.com
Add:Economic And Technological Development Zone, Zhengzhou, Henan, China (Mainland)

Skype: yuxi.zhengzhou

Position : Home > News >

Although the scrap steel shredder is a good equipment for coarse crushing of waste materials, it will also be affected by some conditions during the work. What specific conditions have an impact on the work of the shredder?

Shearing and shredding work, understand the working principle of shredder, then we know what kind of situation will affect its sincere work.
The size of the blades of different shredders are different, so the size of the blade teeth is also different, so the size of the incoming material must match the size of the blank, otherwise the blade teeth cannot catch the material and cannot be caught There is no way to cut and shred the materials, so there should not be too large materials when cutting, because if such materials are blocked, it will affect the entry of the following materials, which will affect the production volume. Therefore, it is necessary to pick when feeding, and sort out the unsuitable materials, so as not to affect the production volume.
Maintenance after the shredder shredder is shut down is also very important. The addition of transmission oil must ensure that the transmission oil is not lower than the standard filling amount and must be checked regularly. Adding lubricating oil to the bearings is relatively frequent. After each work stop, when cleaning the equipment, check whether the temperature at the bearing is too high. If the temperature becomes higher, it may be caused by the reduction in the amount of lubricating oil. , Must be added in a timely manner, so as to ensure that the equipment does not fail during work.

Get a Free Quote Now!

Tel：0086-0371-53762053

Tel：0086-13674998188

Whatsapp：0086 13674998188

Wechat:8613674998188

Skype：yuxi.zhengzhou

E-mail：zhengzhouyuxi@yuximachine.com